PPPOE Server

Mikrotik PPPOE Server

you can use this configuration for PPPoe server that users get public ip. if range of public ip is 192.168.1.0/24 and ip of router is 192.168.1.4 and ip of gateway is 192.168.1.1 first for router set this ip

 then write 1 route for describe gateway:

 NOTE: is better in interface change ARP condition to proxy-arp

 then for user you can provide ip. we provide 245 ip for users in IP>POOL:

 if pppoe setup over other ethernet port like LOCAL

 now for setup PPPOE server look for PPP and in Profiles and click on add bottom:

 well now router for made PPPoE server is ready in PPP click PPPoE servers tab and click add bottom:

 for make username and passoword in light scale in Secrets tab in PPP click on add bottom :

for better manage on users traffic you can apply radius server and for bandwidth use queue.

For More Detail :- http://wiki.mikrotik.com/wiki/PPPOE_Server

Related Posts:

Related Posts for blogger